HP COMPAQ D530 SAMSUNG HDD SP0411N WINDOWS XP DRIVER DOWNLOAD

HP COMPAQ D530 SAMSUNG HDD SP0411N DRIVER DETAILS:

Type: Driver
File Name: hp_compaq_22607.zip
File Size: 16.5 MB
Rating:
4.96
119 (4.96)
Downloads: 88
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now
HP COMPAQ D530 SAMSUNG HDD SP0411N DRIVER



Removing the drive cage On many HP and Compaq computers, drives are attached to drive cages.

Often, the installation and removal instruction for the cages are located next to the drive cage or on the side panel. The following images are some examples of the types of drive cages that come on HP and Compaq computers. For more detailed information about a particular chassis, refer to the Hardware and Servicing guide or User Guide for your particular model of computer. Many Media Center computers come with a swing out drive bay shown below. The plastic covering for the memory card reader must be removed and HP Compaq d530 Samsung HDD SP0411N cord to the front panel lights must be unplugged before the drive bay can be removed.

Adding or Replacing a Hard Drive in HP and Compaq Desktop PCs

Drive HP Compaq d530 Samsung HDD SP0411N examples Step 4: Removing the drive If the drive is attached to the chassis or drive cage with screws, remove the screws and slide the drive out. If the drive is retained by a plastic latching system, lift the latch to slide the drive out. Set the old drive aside.

HP COMPAQ D530 SAMSUNG HDD SP0411N DRIVERS WINDOWS 7

If the drive is to HP Compaq d530 Samsung HDD SP0411N re-used, place it in an ESD safe container for storage. Installing a new drive Use the following steps to install a new hard drive into the computer: Not sure which pins represent Cable Select? Refer to the labeling on the drive itself, looking for CS. If the drive is not labeled, refer to drive documentation.

AaronGTV's Toolkit: HP Compaq d Convertible Minitower Desktop PC

Serial ATA drives do not require jumpers. Slide the new drive into the open bay until the screw holes align with the holes in the chassis or drive cage. If the drive attaches to the chassis using a plastic latch you will need to insert the screws into the drive and screw them down before sliding the drive into place. Chassis screws Sliding guide for a latch system If a drive cage was removed, reattach the drive cage and secure it in place. Connect the cables, following the instructions for the type of drive you HP Compaq d530 Samsung HDD SP0411N installing.

Connect the other end of the Serial ATA cable into HP Compaq d530 Samsung HDD SP0411N back of the hard drive. A regular IDE cable will work, but the data transfer rates will not be as good.

Compaq nc3120 driver

If there is only one hard drive in the computer, connect the ribbon cable using the last connector Master. If there are now two hard drives in the computer, connect the first drive using the last connector on the cable Master and connect the second drive using the middle connector HP Compaq d530 Samsung HDD SP0411N. This can be difficult because space is limited. Be very careful to not dislodge the other cables and make sure that it fits snugly into its connector.

Use a flashlight to make this easier. Connect the power cable into the back of the drive. Be careful to not dislocate any other cables. Make sure that all of the connectors are fully seated. Processor Type: Intel Pentium 4 GHz. Installed Qty: 1.

DRIVER: HP COMPAQ D530 SAMSUNG HDD SP0411N

Max Supported Qty: 1. Cache memory. Type: L2 Cache Installed Size: KB. No its not a hdd problem, its a mobo problem max u can use is with that pc, what u can try is a bios upgrade and hopefull it helps go here  Ive got a hp compaq d it has a pentium 4 inside.

Related Posts