GIGABYTE G1.SNIPER 3 EASY TUNE6 WINDOWS 8 DRIVER

GIGABYTE G1.SNIPER 3 EASY TUNE6 DRIVER DETAILS:

Type: Driver
File Name: gigabyte_g1_14924.zip
File Size: 20.5 MB
Rating:
3.45
47 (3.45)
Downloads: 34
Supported systems: Windows 2008, Windows XP, Windows Vista, Windows 7/8/10
Price: Free* (*Free Registration Required)

Download Now
GIGABYTE G1.SNIPER 3 EASY TUNE6 DRIVER



Upon successfully rebooting itself and getting to the Windows desktop I checked the current CPU speed. Manual adjustment either in BIOS or Easy Tune 6 allowed the clock speed to go up as normal but I found it odd that the software would show a lower clock speed than what the board was set for in BIOS with no evidence of thermal throttling or instability. With no evidence of instability I pushed on with the automated CPU voltage Gigabyte G1.Sniper 3 Easy Tune6 set the power phases to give me all these had. That one change allowed me to attain a 4.

However the higher automated voltage created a high temp situation. No throttling occurred but 93c was a bit warmer than I wanted it to be.

GIGABYTE G1.SNIPER 3 EASY TUNE6 TREIBER HERUNTERLADEN

I was able to manually adjust the CPU voltage to 1. This was not the case here.

[H]ardOCP: Gigabyte G1 Sniper M3 microATX Motherboard Review

Default settings of 1. It is not as good as it could have been were it to have BCLK adjustability and better cooling hardware.

  • GIGABYTE 3 Motherboard Review – Techgage
  • Download Motherboard Gigabyte A88X (rev. ) Windows 10 drivers and software.
  • Do not use easytune - it is a virus and will screw up your motherboard - Page 3
  • Gigabyte - This Driver Can't Release to Failure
  • Download Motherboard Gigabyte G1.Sniper A88X (rev. 3.0) Windows 10 drivers and software.
  • 23 Comments
  • GIGABYTE G1.SNIPER A88X SOCKET FM2+ MOTHERBOARD

I wanted to check this Gigabyte G1.Sniper 3 Easy Tune6 out for awhile and in my mind I always compared it to the Maximus V Gene board which was a fantastic mATX board and a great board by any standard. Features aside I think this board does compare well to the ASUS offering as both are kind of targeted toward the same basic audience, albeit with different priorities and budgets in mind. Aside from the overclocking quirks I mentioned the time spent with the G1 Sniper M3 was nothing short of excellent.

Four Multi-GPU Z77 Boards from $280-$350 - PLX PEX 8747 featuring Gigabyte, ASRock, ECS and EVGA

At no point did the motherboard give me any issues. There were never any problems recovering from bad overclocks or installation issues with the OS, drive detection issues, or benchmark anomalies. The feature set is lean but solid.

GIGABYTE G1.SNIPER 3 EASY TUNE6 DRIVERS FOR WINDOWS 10

Precision is the watch word in all areas of the motherboard's design, with as much attention to detail paid to the motherboards aesthetic qualities as to its technical prowess. While we look at this from a hardware enthusiast perspective it is very much aimed at the gamer that wants to take on a DIY project rather than the hardware purist.

GIGABYTE G1.SNIPER 3 EASY TUNE6 DRIVER DOWNLOAD FREE

Whether or not Gigabyte G1.Sniper 3 Easy Tune6 electric lime green accent colors are your thing, is obviously a personal call. I think the M3 will look right at home in many builds however it is not adorned with fake bullet heatsinks or other associated "cool" marketing that we have seen in other "Killer" motherboards. This motherboard has seen a fairly healthy release of BIOS over the last year and does not seem to have been ignored in any way, so that is certainly a good thing. Pulling the add-in video card and relying on the Intel on-chip video out solved this hurdle for me. Once I had fully booted and shut down, I could then use my add-in video card without issue. Not an ideal situation, and it took me a while to figure it out, but once you are in the know, it is a simple fix Gigabyte G1.Sniper 3 Easy Tune6 you have an issue.

Torture testing the G1 Sniper M3 overnight on an open bench proved successful without any issues. But the bios settings still the same.

ASUS Maximus V Gene vs. Gigabyte G1.Sniper M3 Review

I have to set the processor multipliers and voltage manually. I'm very disappointed with gigabyte, this issue has no end.

Asus X55VD VIA Audio31 Comments
Genius SlimStar 801 KeyboardGigabyte G1.Sniper A88X (rev. 3.0) drivers for other System
ZyXEL ZyWALL 110 VPN Firewall16 Comments
Asus A52JE Notebook D-MAX CameraCustomers Who Bought This Item Also Bought
Acer Aspire F5-571 Synaptics TouchpadFrequently Bought Together

IXTU still exists today, and has been modified to work with every Intel processor generation. Mother board manufactures are able to use the same methods that Intel created and use in their IXTU program to allow over clocking in Windows. I have yet to see any of them produce software that works as well as IXTU does.

But there is one basic thing that it does not do: You can even pair a profile with a program you use, run that program and an OC profile you defined will be used until the program is closed. While that may seem to be a limitation of this software, there may be are good reasons why it is not allowed. It seems they succeeded to a degree, but seem to not fully know what they are doing. It seems as if the data in the MSR registers was changed but then locked. The 3 is the newest member of the GIGABYTE G1-Killer series of gaming. This makes it easier to switch between overclocking and regular BIOS  Missing: Tune6. A 3 é o mais novo membro da série GIGABYTE G1-Killer de a fully interactive and illustrative GUI that Gigabyte G1.Sniper 3 Easy Tune6 users to easily and intuitively make key  Missing: Tune6.

Related Posts