ASROCK N73V-S SATA RAID DRIVER DETAILS:
|File Size:||8.4 MB|
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* (*Free Registration Required)|
ASROCK N73V-S SATA RAID DRIVER
Close the socket: Rotate the load plate onto the IHS. While pressing down Asrock N73V-S SATA RAID on load plate, engage the load lever. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other.
ASROCK 775 N73V-S HASTA CORE2QUAD CON VID/SON/RED SLOT PCIE EN LIMA
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto Asrock N73V-S SATA RAID of IHS on the socket surface. Apply Thermal Interface Material Step 2. Step 3. Place the heatsink onto the socket.
Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.
- ASRock > N73V-S
- Asrock N73V-S Motherboards > Downloads Free! Drivers, Utilities, Manual and BIOS
- Download Asrock N73V-S NVIDIA SATA2 Driver NF__SATA for Windows XP
- Asrock N73V-S Drivers
- ASRock N73V-S Realtek High Definition Audio οδηγός λήψη δωρεάν (ver. R2.31)
- Send us feedback
- ASRock N73V-S NVIDIA SATA2 driver download free (ver. NF_1611_SATA)
Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard. Secure excess Asrock N73V-S SATA RAID with tie-wrap to ensure cable does not interfere with fan operation or contact other components.
Please be noticed that this motherboard supports Combo Cooler Option C. For dual channel confi guration, you always need to install identical the same brand, speed, size and chip-type DDR3 DIMM pair in the slots of the same color. If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips Asrock N73V-S SATA RAID. PCI slots: PCIE slots: Therefore, both these two slots will work at x8 bandwidth.
RAM & SSD Upgrades ASRock N73V-S
Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Asrock N73V-S SATA RAID the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use.
Keep the screws for later use. Align the card connector with the slot and press fi rmly until the card is completely seated on the slot.
Fasten the card to the chassis with screws. Replace the system cover.
Please follow the installation procedures in this section. Requirements 1. Make sure that your power supply unit PSU can provide at least the minimum power required by your system.
N73V-S. NVIDIA® GeForceDX VGA, Pixel ShaderMax.
Sound Card - Drivers
shared memory MB 4 x Asrock N73V-S SATA RAID Gb/s connectors, support RAID (RAID 0, RAID 1 and JBOD), NCQ, AHCI and Hot Plug functions 1 x SATA 1 to 1 Power Cable. The specification is subject to change without notice. 4 x SATAII Gb/s connectors, support RAID (RAID 0. RAID 1 1 x SATA 1 to 1 Power Cable (Optional).